Control Magazine on Simulation and Training | MYNAH

Control Magazine on Simulation and Training

Product Family: MiMiC Simulation

By Martin Berutti, submitted on September 21st, 2009

Printer Friendly

CONTROL Magazine's Executive Editor, Jim Montague, and I discuss what plant managers need in order to successfully implement a dynamic offline operator training program.

Posted on ControlGlobal.com, Control's executive editor, Jim Montague, and I discuss the current state of the simulation/training field and how it's likely to evolve in the future. The podcast also covers what end users need to know to implement a simulation/training program for their process applications, and what should be on any to-do list to get a simulation/training project up and running.

The podcast can be listened to at http://www.controlglobal.com/multimedia/2008/028.html

I look forward to your comments, questions, or suggestions.
Hope to hear from you soon.

Mart Berutti, 9/21/09

Trackback URL for this post:

http://www.mynah.com/trackback/229

Martin Berutti's blog
Login or register to post comments

Recent Posts

How Real Does Your Simulation Need To Be?
Posted by Martin Berutti
How does the user define the level of simulation fidelity required to train operators or test control strategies?
MiMiC - Control Magazine Reader's Choice for Testing and Training
Posted by Martin Berutti
Control Magazine 2010 Reader's Choice Awards are published and the readers of Control like MiMiC.
How Good Is Your Operator’s Mental Model?
Posted by Martin Berutti
In the December 2009 issue of Chemical Processing, David Strohbar of Beville Engineering and Danyele Harris-Thompson of Klein Associates, outline st

Knowledge Base

DeltaV Serial Card Hardware v5.6
Posted by Tom Freiberger
This technical note describes how the DeltaV Serial Card hardware change affects driver versions. DeltaV Programmable Serial Interface Card (PSIC) Series 2 hardware version 5.6 requires drivers
DeltaV Serial Driver Installation Problem - Error 48
Posted by Tom Freiberger
This technical note provides a fix for error 48 when installing DeltaV Serial Card drivers.
Modbus TCP VIM Firmware Update Procedure
Posted by Tom Freiberger
This technical note details the firmware update procedure for the Virtual IO Module (VIM) with firmware IOD-4101 Modbus TCP v3.6.11 or later.

Media

Control System Integrity and Operator Training
Posted by Martin Berutti

This podcast discusses the importance of maintaining off-line control system integrity in operator training systems. Recorded by Martin Berutti, MYNAH Technologies, December 2007.
Understanding Simulation Fidelity
Posted by Martin Berutti

This podcast provides direction for selecting the level of model fidelity applied to simulation systems for software acceptance testing and operator training. Recorded by Martin Berutti, MYNAH Technologies, June 2007.
MiMiC v3.1 Release, Part 1 of 3
Posted by admin

Chemical Engineering's Editor-in-Chief Rebekkah Marshall interviews Martin Berutti about the December 2008 MiMiC v3.1 release.

Subscribe to RSS feed Contact Legal Privacy

ISO 9001-2008 Certified
© 2010 MYNAH Technologies. All rights reserved. A division of Experitec, Inc.