Knowledge Base Search

Select a Product Family to view Knowledge Base articles. Product manuals, bulletins, and Quick Start guides can be found on product pages.
2012-02-20 10:40 Product Bulletins, MiMiC Simulation

The MiMiC Debutanizer Operator Training Package is a high fidelity operator training system for distillation columns.  

2012-02-07 12:22 Application Notes, DeltaV Virtual IO Module

This application note describes the recommended settings for integrating the Allen-Bradley 193-ETN module using Class1 messaging via IOD-4104 Ethernet/IP Virtual I/O Module. This document is specifically intended for the application of the 193-ETN and the E1 Plus with a Virtual I/O module. For configuring the 193-ETN for use in other applications, see the manuals/documentation pertaining to the specific application hardware (download links in Introduction).

2012-01-03 17:06 Technical Notes, MiMiC Simulation

The MiMiC External Model Interface (MEMI) allows external models access to the MiMiC modeling environment.

2012-01-03 16:25 Application Notes, DeltaV Virtual IO Module

This application note describes the recommended settings for integrating 1769 CompactLogix controllers using the Class 1 Generic ENBT Modules and the IOD-4102 Allen Bradley Ethernet/IP driver for the Virtual IO Module.

2011-12-07 12:21 DeltaV Virtual IO Module, IOD-4102 - Ethernet/IP Scanner Driver (Rockwell PLC Interface - Logix, PLC5, SLC505), Technical Notes

This flash upgrade procedure is for upgrading Simplex or Redundant VIM’s from EtherNet/IP Driver v3.3.x to firmware v3.5.x or later. For redundant applications, two VIMs with the same firmware version must be used.

2011-12-07 11:22 DeltaV Virtual IO Module, IOD-4101 - Modbus TCP/IP Master Driver (General Modbus TCP/IP Communications), IOD-4102 - Ethernet/IP Scanner Driver (Rockwell PLC Interface - Logix, PLC5, SLC505), Technical Notes, IOD-4104 - Ethernet/IP Scanner Driver (Generic Devices), IOD-4105 - FMC722 Ethernet Protocol Driver

This flash migrate procedure is for migrating Simulation VIM’s to I/O VIM using VIMNet Explorer v9.1.4.33 or later. For redundant applications, two VIMs with the same firmware version must be used.

2011-10-19 16:59 Press Releases, MiMiC Simulation

MYNAH Technologies announces the release of MiMiC v3.4 Simulation Software for operator training and automation system testing. 

2011-10-07 09:13 Technical Notes, MiMiC Simulation

To follow is the agenda for the 5 day, Dynamic Simulation with MiMiC Course:

2011-09-14 08:38 DeltaV Virtual IO Module, Release Notes

This article discusses how to access the latest documentation within VIMNet Explorer v9.1.x.x.

2011-08-26 16:35 Application Notes, MiMiC Simulation

This application note describes the use and limitations of DeltaV Simulate CHARMS I/O using MiMiC DeltaV CIOC/VCIOC SIO Driver.

[RSS] Subscribe to RSS feed | Contact | Legal | Privacy

ISO 9001-2008 Certified
© 2013 MYNAH Technologies LLC. All rights reserved.