Knowledge Base /
Technical Notes
Mimic Advanced Modeling Objects License Structure
By Martin Berutti
Product: Mimic Simulation

Mimic Advanced Modeling Objects (AMO) provide advanced process modeling capabilities for improving plant life cycle performance. This knowledge base article shows the licensing structure for Mimic AMOs and the features included with each license.

The following figure shows the order of license selection and the prerequisites for each license.

AMO Core

All Advanced Modeling Objects licenses must have the AMO Core. The Core includes objects for common unit operations and dynamic modeling infrastructure. The Core license contains the following objects:

  • Advanced Sink
  • Advanced Source
  • Air Cooled Heat Exchanger
  • Bin
  • Compressor
  • Conveyor
  • Dynamic Heat Exchanger
  • Orifice Plate
  • Pipe Delay
  • Pressure Reducing Valve
  • Pressure Regulator
  • Pump
  • Stream Input & Stream Output
  • Stream Tee
  • Valve
  • Vessel
Item Description
MM3-7111 Mimic Advanced Modeling Objects Core

AMO Advanced Thermo Package

The Advanced Thermo Package can be added to any Mimic system with an AMO Core license. Mimic Advanced Thermo Package is a complete set of advanced Thermodynamic methods and data designed for users in the petrochemical, chemical, oil and gas, and refining industries. The Advanced Thermo Package license contains the following:

  • Cubic Equations of State - Peng-Robinson 76, Peng-Robinson 76 - Boston Mathias Alpha, Peng-Robinson 78, Peng-Robinson 78 - Boston Mathias Alpha, Predictive Peng-Robinson 78, Soave-Redlich-Kwong (SRK), Soave-Redlich-Kwong (SRK with Boston Mathias Alpha), Predictive Soave-Redlich-Kwong by Jaubert and Privat (SRK-JP)
  • Enthalpy and fugacity based upon selected Equation of State.
  • NRTL activity models for liquid phase and excess enthalpy
  • Non-ideal component binary behavior based upon publicly available data published in academic sources or estimated by Dortmund UNIFAC.
  • Thermo Expert Wizards advise user on selection of binary interaction parameters
Item Description
MM3-7112 Mimic Advanced Thermo Package

AMO Power Generation Package

The Power Generation Package can be added to any Mimic system with an AMO Core license. The Power Generation Package includes objects that provide high-fidelity dynamic models for a wide range of power generation facility configurations. The Power Generation license contains the following objects:

  • Boiler with Furnace
  • Desuperheater
  • Fuel
  • Furnace
  • Multi-Stage Turbine
  • Steam Header
  • Vessel (VLE)
Item Description
MM3-7113 Mimic Advanced Modeling Power Generation Package

AMO Solids 1 Package

The Solids 1 Package can be added to any Mimic system with an AMO Core license. The Solids 1 Package includes objects for unit operations commonly found in mineral processing plants as well as particle size distribution tracking. The Solids 1 license contains the following objects:

  • Compactor
  • Crusher
  • Cyclone
  • Mill
  • Screen
Item Description
MM3-7131 Mimic Advanced Modeling Solids 1 Package

AMO Solids 2 Package

The Solids 2 Package can be added to any Mimic system with AMO Solids 1 and AMO Core licenses. The Solids 2 Package builds on the objects in the Solids 1 Package to provide a more rigorous dynamic model for particle size distribution tracking and tunable breakage matrices for communition operations. The Solids 2 license contains the following objects:

  • Centrifuge Decanter
  • Flotation Cell
  • Settling Tank
Item Description
MM3-7132 Mimic Advanced Modeling Solids 2 Package

AMO Separations 1 Package

The Separations 1 Package can be added to any Mimic system with an AMO Core license. The Separations 1 Package includes objects for unit operations commonly found in chemical processing plants. The Separations 1 license contains the following objects:

  • Separator
  • Jet Condenser
  • Surface Condenser
  • Vessel (VLE)
Item Description
MM3-7121 Mimic Advanced Modeling Separations 1 Package

AMO Separations 2 Package

The Separations 2 Package can be added to any Mimic system with AMO Separations 1 and AMO Core licenses. The Separations 2 Package builds on the objects in the Separations 1 Package to provide a more rigorous dynamic model for unit operations commonly found in chemical processing plants. The Separations 2 license contains the following objects:

  • Distillation Column
  • Stripper
Item Description
MM3-7122 Mimic Advanced Modeling Separations 2 Package

AMO CST Reactor

The CST Reactor Object can be added to any Mimic system with AMO Separations 1 and AMO Core licenses. The Continuous Stirred Tank Reactor Object provides a high-fidelity dynamic model for simulation of a wide variety of the industrial reactors.

Item Description
MM3-7141 Mimic Advanced Modeling CST Reactor Object

AMO Bioreactor

The Bioreactor Object can be added to any Mimic system with AMO Separations 1 and AMO Core licenses. The Bioreactor Object provides provides a high-fidelity dynamic model of biological processes for the simplest to the most sophisticated batch or continuous bioreactors and fermenters.

Item Description
MM3-7142 Mimic Advanced Modeling Bioreactor Object

Contact

For a quotation or more information on Mimic Advanced Modeling Objects, contact us at +1.636.728.2000 or mimic@emerson.com.