Knowledge Base

Search the Knowledge Base library for all product documentation, including product bulletins, product release notes, technical notes, industry applications, and white papers.
Featured Article
Displaying 1 - 8 of 10 results.
IntroductionGE Genius IO blocks may use either of two methods for redundancy. The first method will be referred to as 31/30 redundancy, the second as BSM redundancy. By Geoff Nash
This technical note describes the Genius and TRIO IO blocks supported by the PLC IO Interface and their configuration parameters. By Geoff Nash
This technical note describes the Modbus register mapping for the PLC IO Interface for GE Genius IO. By Geoff Nash
This application note describes the configuration required to support the Modicon B846 module with the PLC IO Interface By Geoff Nash
This application note describes S908 Remote IO bus length limitations when using the PLC IO Interface for Modicon S908 Remote IO. By Geoff Nash
This technical note shows the hardware configuration required to make Allen-Bradley SLC IO Racks work with the PLC IO Interface. By Geoff Nash
This technical note describes the porcedure for using the PLC IO Interface to auto-configure a GE Genius or TRIO IO network installation. By Adisa Shaljani
This technical note shows the IO update performance of the PLC IO Interface for AB 1771 Remote IO to a DeltaV Serial Card and also to the VIM Network Gateway. By Geoff Nash

Pages