Knowledge Base

Search the Knowledge Base library for all product documentation, including product bulletins, product release notes, technical notes, industry applications, and white papers.
Featured Article
Displaying 17 - 24 of 52 results.
This application note documents the required procedure for integrating the Digi One IAP serial server with a DeltaV Virtual IO Module with Generic EtherNet/IP firmware (IOD-4104). Reference manuals for both the Digi One IAP and the DeltaV Virtual IO Module firmware IOD-4104 are provided in the beginning section of the application note. By
This technical note describes the recommended settings for integrating the Stahl IS1 Remote IO System with a Modbus TCP Virtual IO Module. Documentation is provided in the introduction for configuring the Stahl IS1 with a Modbus TCP interface in addition to the Modbus TCP Virtual IO Module manual. By
This technical note describes the recommended settings for integrating the Allen-Bradley 193-ETN module using Class1 messaging via IOD-4104 Ethernet/IP Virtual I/O Module. This document is specifically intended for the application of the 193-ETN and the E1 Plus with a Virtual I/O module. For configuring the 193-ETN for use in other applications, see the manuals/documentation pertaining to the specific application hardware (download links in Introduction). By Geoff Nash
This technical note describes the recommended settings for integrating 1769 CompactLogix controllers using the Class 1 Generic ENBT Modules and the IOD-4102 Allen Bradley Ethernet/IP driver for the Virtual IO Module. By Edin Rakovic
IntroductionGE Genius IO blocks may use either of two methods for redundancy. The first method will be referred to as 31/30 redundancy, the second as BSM redundancy. By Geoff Nash
This technical note covers the integration of a DeltaV Process System with SquareD Omni6 MCC using Modbus TCP/IP and the Virtual IO Module. By Martin Berutti
DeltaV Diagnostics view showing port statistics.This technical note describes the integration of Wago 750-841 IO to DeltaV using Modbus TCP/IP and the Virtual IO Module. By Martin Berutti
This technical note describes the recommended settings for integrating KTron KCM/SCM controllers using the Generic Device Ethernet/IP driver for the Virtual IO Module. By Geoff Nash