Knowledge Base

Search the Knowledge Base library for all product documentation, including product bulletins, product release notes, technical notes, industry applications, and white papers.
Featured Article
Displaying 33 - 40 of 97 results.
This technical note describes the recommended settings for integrating the Stahl IS1 Remote IO System with a Modbus TCP Virtual IO Module. Documentation is provided in the introduction for configuring the Stahl IS1 with a Modbus TCP interface in addition to the Modbus TCP Virtual IO Module manual. By
This technical note describes the recommended settings for integrating the Allen-Bradley 193-ETN module using Class1 messaging via IOD-4104 Ethernet/IP Virtual I/O Module. This document is specifically intended for the application of the 193-ETN and the E1 Plus with a Virtual I/O module. For configuring the 193-ETN for use in other applications, see the manuals/documentation pertaining to the specific application hardware (download links in Introduction). By Geoff Nash
This technical note describes the recommended settings for integrating 1769 CompactLogix controllers using the Class 1 Generic ENBT Modules and the IOD-4102 Allen Bradley Ethernet/IP driver for the Virtual IO Module. By Edin Rakovic
This flash upgrade procedure is for upgrading Simplex or Redundant VIM’s from EtherNet/IP Driver v3.3.x to firmware v3.5.x or later. For redundant applications, two VIMs with the same firmware version must be used. By Edin Rakovic
This flash migrate procedure is for migrating Simulation VIM’s to I/O VIM using VIMNet Explorer v9.1.4.33 or later. For redundant applications, two VIMs with the same firmware version must be used. By Edin Rakovic
IntroductionGE Genius IO blocks may use either of two methods for redundancy. The first method will be referred to as 31/30 redundancy, the second as BSM redundancy. By Geoff Nash
The S-Series Virtual IO Module (VIM) Network Gateway provides the exact DeltaV IO interface to Industrial Ethernet networks and devices as the M-Series VIM. Changes between the M-Series and S-Series LED hardware display are described below. By Edin Rakovic
This technical note provides a fix for error: CfgMismatch - Cfg: Prog. Serial Card, 2 Ports, RS232/RS485, S Series; Actual: Unsupported Card when installing DeltaV Ethernet IO Card. By Edin Rakovic