Knowledge Base

Search the Knowledge Base library for all product documentation, including product bulletins, product release notes, technical notes, industry applications, and white papers.
Featured Article
Displaying 49 - 56 of 169 results.
The purpose of this technical note is to specify the network cabling and grounding standards for the M-Series and S-Series Virtual IO Modules (VIMs). By Jake Nichelson
This application note describes the process for integrating the DeltaV Virtual IO Module with an FMC722 TPU using firmware IOD-4105. By
This application note details the integration of the Allen-Bradley 1734-AENT Point IO Adapter with the DeltaV Virtual IO Module using the Generic Ethernet/IP firmware. By Geoff Nash
This application note documents the required procedure for integrating the Digi One IAP serial server with a DeltaV Virtual IO Module with Generic EtherNet/IP firmware (IOD-4104). Reference manuals for both the Digi One IAP and the DeltaV Virtual IO Module firmware IOD-4104 are provided in the beginning section of the application note. By
This technical note describes the recommended settings for integrating the Stahl IS1 Remote IO System with a Modbus TCP Virtual IO Module. Documentation is provided in the introduction for configuring the Stahl IS1 with a Modbus TCP interface in addition to the Modbus TCP Virtual IO Module manual. By
This technical note describes the recommended settings for integrating the Allen-Bradley 193-ETN module using Class1 messaging via IOD-4104 Ethernet/IP Virtual I/O Module. This document is specifically intended for the application of the 193-ETN and the E1 Plus with a Virtual I/O module. For configuring the 193-ETN for use in other applications, see the manuals/documentation pertaining to the specific application hardware (download links in Introduction). By Geoff Nash
This technical note describes the recommended settings for integrating 1769 CompactLogix controllers using the Class 1 Generic ENBT Modules and the IOD-4102 Allen Bradley Ethernet/IP driver for the Virtual IO Module. By Edin Rakovic
This flash upgrade procedure is for upgrading Simplex or Redundant VIM’s from EtherNet/IP Driver v3.3.x to firmware v3.5.x or later. For redundant applications, two VIMs with the same firmware version must be used. By Edin Rakovic