Knowledge Base

Search the Knowledge Base library for all product documentation, including product bulletins, product release notes, technical notes, industry applications, and white papers.
Featured Article
Displaying 57 - 64 of 169 results.
This flash migrate procedure is for migrating Simulation VIM’s to I/O VIM using VIMNet Explorer v9.1.4.33 or later. For redundant applications, two VIMs with the same firmware version must be used. By Edin Rakovic
IntroductionGE Genius IO blocks may use either of two methods for redundancy. The first method will be referred to as 31/30 redundancy, the second as BSM redundancy. By Geoff Nash
This technical note describes the use and limitations of DeltaV Simulate CHARMS I/O using Mimic DeltaV CIOC/VCIOC SIO Driver. By Dean Cook
The S-Series Virtual IO Module (VIM) Network Gateway provides the exact DeltaV IO interface to Industrial Ethernet networks and devices as the M-Series VIM. Changes between the M-Series and S-Series LED hardware display are described below. By Edin Rakovic
This technical note provides a fix for error: CfgMismatch - Cfg: Prog. Serial Card, 2 Ports, RS232/RS485, S Series; Actual: Unsupported Card when installing DeltaV Ethernet IO Card. By Edin Rakovic
This flash upgrade procedure is for upgrading ModbusTCP Simplex or Redundant VIMs. For redundant applications, two VIMs with the same firmware version must be used. By Edin Rakovic
The purpose of this technical note is to describe the options for using DeltaV M Series Virtual IO Modules with S Series Controllers. By Edin Rakovic
This technical note describes a memory leak issue with the DeltaV Simulate OPC Driver for Mimic 3.3.0. By Tom Freiberger